EasyManuals Logo

IKONIX apt 400XAC Series User Manual

IKONIX apt 400XAC Series
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background image
123
Enter the voltage reading from the voltmeter with the numeric keypad. When the
value has been selected press the Enter soft key and you will be moved to the
next calibration parameter Voltage 300.0V. If you press the Esc soft key you will
be returned to the calibration mode screen.
9.10 Calibration of Voltage 300.0V
Use the up or down arrow soft keys to navigate to the Voltage 300.0V parameter
and press the Select soft key.
Follow the prompt message provided on the display, and press the Test/Reset
button to move into the calibration screen for voltage. If you press the Exit soft
key at this screen you return to the calibration mode screen.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IKONIX apt 400XAC Series and is the answer not in the manual?

IKONIX apt 400XAC Series Specifications

General IconGeneral
BrandIKONIX
Modelapt 400XAC Series
CategoryAC Power Distribution
LanguageEnglish