User Manual
29
9 Dimensions
Model Width
(mm) [W]
Length (mm)
[L]
Depth (mm)
[D]
Door
Thickness
(mm) [S]
Cut-Out
(mm) W:H
Top Edge
(mm) W:L
Hoses
1
Notes
BI 29 Dual 340 496+165* 330 35 included 344:500 343:499 / REM
BI 36 240 438 550+165* 35 included 442:244 / +25 REM
BI 40 395 395+165* 380 40 included 399:399 415:415 +20 REM
BI 41 Dual 340 496 450+165* 13 included 344:500 343:499 / REM
BI 53F 425 645 465+165* / 429:649 430:648 +15 REM
BI 75 425 645 465+165* / 429:649 430:648 +15 REM
BI 92 Dual 480 801 455+165* / 484:805 484:804 +25 REM
NOTES:
REM: The product is provided with the possiblity of moving the compressor unit based on the length of
the supplied hoses.
1: This dimension indicates the space which is needed for hose output from the product, in order to bend
them if necessary.
AS PER REGULATIONS AND FOR PROPER OPERATION, THE WALLS OUTSIDE OF THE REGRIGERATOR
SHOULD BE SET AT THE FOLLOWING DISTANCES FROM THE INTERNAL WALLS OF THE UNIT: 20mm ON
WALLS WHERE THE COMPRESSOR IS NOT PRESENT AND 50MM ON THE WALLS WHERE THE COMPRESSOR
IS PRESENT. IF THESE RULES CANNOT COMPLIED WITH, THE MINIMUM DISTANCE MEASUREMENTS MUST
BE 5mm AND THE MATERIALS WITH WHICH THE WALLS ARE MADE MUST BE EXPLOSION PROOF.
To Next Page
Loading...
Need help?
General
