15
Advanced settings
Advanced settings are for adapters, are per-adapter, and are only accessible when you are connected to an adapter. The advanced settings button is disabled if you aren't
connected to an adapter. You can select password settings, network and security types, and access codes. You can set a password up to restrict access to advanced set-
tings. You can also set an access code to ensure users project to the intended device. The bottom part of this window changes if you select Access Point +, see page 22 for
those options, and if you select Enterprise mode, see page page 25.
this is the default adapter name, you can customize
the name by adding text in the box, but the prefix IFS-
and the suffix remain the same.
To Next Page
Loading...
Need help?
General