17
Turn the following 3 options on by checking their checkboxes.
Access Code
This causes the adapter to display a 4-digit code on the projection screen that must be entered by the user before the desktop is displayed. Use this to prevent users from
using projectors that are not at their location (users must be in the same location as the projector to see the access code).
Local Audio
This sends sound to the computer's speakers instead of the adapter. Select this if the adapter's AUDIO OUT connector is not used.
Auxiliary computer input priority
By default, the adapter stops showing auxiliary video when a user begins to wirelessly project to the adapter. Select this to instead have the adapter always display auxiliary
video when it's available; in this mode, if you want to project to the adapter, the computer connected to auxiliary video first needs to be turned off or disconnected from
the auxiliary connector.
Private IP Address
This allows you to change the adapter’s wireless IP address. Only do this if the default conflicts with another device on your network.
To Next Page
Loading...
Need help?
General