18
NS-32D220NA18/NS-32D220MX18/NS-43D420NA18
www.insigniaproducts.com
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see What connection should I use? on page 17.
You can connect a cable or satellite box using:
•HDMI (best)
•AV (good)
• Coaxial (good)
HDMI (best)
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on
the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or to highlight HDMI1, HDMI2, or HDMI3, then press ENTER.
Note
• The 32" model does not have an HDMI3 option.
• An HDMI cable carries both audio and video. You do not need to use any
audio cables.
Cable or
satellite box
43"
Side of TV
HDMI cable
connector
HDMI jack
On your TV
Cable wall
jack
32"
Side of TV
HDMI cable
HDMI cable
To Next Page
Loading...
Need help?
General