Insignia NS-32D220NA18 User Manual

74
NS-32D220NA18/NS-32D220MX18/NS-43D420NA18
www.insigniaproducts.com
My TV does
not turn on
when I turn on
my device.
• Make sure that the INlink feature is
turned on. See Turning INlink on or off
on page 40.
• Make sure that TV Auto Power On is
set to On on the INlink menu. See
Turning TV Auto Power On on or off
on page 41.
• The device may not support this
feature. See the documentation that
came with the device for more
information.
The Audio
Receiver
setting on the
INlink menu
keeps turning
back on after
it is turned off.
• When Audio Receiver is set to Off
and INlink Control is set to On and
you make an adjustment to the audio
receiver (for example, turn the volume
knob or press a button), Audio
Receiver is automatically set to On.
To prevent this from happening, turn
off the INlink feature. See Turning
INlink on or off on page 40.
Problem Solution
Two volume
bars appear
when
adjusting the
volume.
• When you adjust the volume on the
audio receiver or with the TV remote
control, a double volume bar appears,
one for the TV volume and one for the
audio receiver volume.
I cannot select
the Root
Menu option
on the INlink
menu.
OR
The device’s
root menu
does not open
when I select
Root Menu
on the INlink
menu.
• The device may not support this
feature. See the documentation that
came with the device for more
information.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your
TV, then turn it on again.
Problem Solution

Insignia NS-32D220NA18 Specifications

General

Brand	Insignia
Model	NS-32D220NA18
Category	LED TV
Language	English