EasyManuals Logo
Home>Intel>Computer Hardware>ATX 3.0

Intel ATX 3.0 User Manual

Intel ATX 3.0
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Processor Configurations
336521 17
2 Processor Configurations
2.1 Processor Configurations - RECOMMENDED
The processor power in a desktop computer is provided by the 12V2 power rail of
power supplies with multiple power rails. To meet the desktop processor power needs
a desktop power supply must provide the current value list in Table 2-1
for the 12V2
voltage rail. Table 2-1 shows the various processor current requirements represented
by the desktop processor’s TDP. If a power supply only has one 12V rail then Table
2-1 shows the amount of current that needs to be dedicated to the desktop processor
in a system level power budget.
Table 2-1: 12V2 Current for Processor Configurations
PSU 12V2
Capability Recommendations
Processor TDP
Continuous
Current
Peak Current
165 W 37.5 A 40 A
125 W 26 A 39 A
65 W 23 A 34 A
35 W 11 A 19 A
NOTES:
1. If the power supply supports, the 240 VA Energy Hazard protection requirement then
current levels for the 12 Volt rail above 18 Amps must be split into multiple 12 V rails.
2. Continuous current is defined for the processors PL2 (Turbo) power limit since desktop
processors are expected to stay at PL2 for many seconds, sometimes close to 1
minute. For a PSU any time over 1 second is considered Continuous current.
3. Peak Current is defined for the processor’s PL4 which defines Peak current for a max
time of 10 ms.
All future processor power/PSU current requirements will be defined in a document
titled ATX12VO and ATX12V PSU Design Guide Addendum (# 62148
4) that is
applicable to both Single Rail and Multi Rail ATX Power Supplies. Refer to that
document for details of where these values come from.
2.2 High End Desktop Market Processor
Considerations
The High-End Desktop market requires power supplies with higher power levels than
typical mainstream market. The EPS12V specification is often referenced for these
designs. The EPS12V specification is a power supply form factor for the server market.
This Desktop ATX Power Supply Design Guide includes higher power levels to support
these higher performance desktop computers.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel ATX 3.0 and is the answer not in the manual?

Intel ATX 3.0 Specifications

General IconGeneral
BrandIntel
ModelATX 3.0
CategoryComputer Hardware
LanguageEnglish

Related product manuals