46 Mobile Intel
®
945GM Express Chipset
Development Kit User’s Manual
Hardware Reference
4.4 Power On and Reset Buttons
The Intel
®
945GM Express Chipset board has two push buttons, POWER and RESET. The
POWER button releases power to the entire board, causing the board to boot. The RESET button
will force all systems to warm reset. The two buttons are located near the CPU close to the edge of
the board. The POWER button is located at SW1C2 (#1 below) and the RESET button is located at
SW1C1 (#2 below).
Note: If the board is powered from an external ATX power supply (not a power brick), the Power button
must be pressed twice to turn on the system.
Figure 5. Intel
®
945GM Express Chipset Development Kit Power On and Reset Buttons
B5474-01
Power
Reset
To Next Page
Loading...
Need help?
General
