Desktop Board Features
11
Manufacturing Options
Table 3 describes the manufacturing options of the boards.
Table 3. Manufacturing Options
Characteristic Specification
Communication and
Networking Riser (CNR)
Connector
One CNR connector:
• Slot shared with PCI bus connector 5 on D815EEA2 and D815EPEA2 boards.
• Slot shared with PCI bus connector 3 on D815EFV and D815EPFV boards.
Digital Video Output
(DVO)
Interface for optional Digital Visual Interface (DVI) card to support Flat Panel,
Digital CRT, or TV out (D815EEA2 and D815EFV boards only).
Front Panel Audio
Connector
Routes mic in and line out to the front panel.
Front Panel USB
Connector
Provides access to two additional USB ports, routed through the optional SMSC
LPC47M142 LPC bus I/O controller.
Integrated LAN
Subsystem
Intel
®
82562ET that provides a basic interface to the RJ-45 connector with
integrated LED’s located on the back panel.
I/O Controller
SMSC LPC47M142 LPC bus I/O controller
Wake on LAN
†
(WOL)
Technology Connector
Support for system wake up using an add-in network interface card with remote
wake up capability.
✏
NOTE
For information about Intel
®
desktop boards, including technical product specifications, BIOS
upgrades, and device drivers, go to the Intel World Wide Web site at:
http://support.intel.com/support/motherboards/desktop
To Next Page
Loading...
Need help?
General
