BIOS Setup Program
95
4.4.2 Boot Configuration Submenu
To access this submenu, select Advanced on the menu bar, then Boot Configuration.
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
The submenu represented by Table 65 is for setting Plug and Play options, resetting configuration
data, and the power-on state of the Numlock key.
Table 65. Boot Configuration Submenu
Feature Options Description
Plug & Play O/S
• No (default)
• Yes
Specifies if manual configuration is desired.
No
lets the BIOS configure all devices. This setting is
appropriate when using a Plug and Play operating system.
Yes
lets the operating system configure Plug and Play
devices not required to boot the system. This option is
available for use during lab testing.
Reset Config Data
• No (default)
• Yes
No
does not clear the PCI/PnP configuration data stored in
flash memory on the next boot.
Yes
clears the PCI/PnP configuration data stored in flash
memory on the next boot.
Numlock • Off
• On (default)
Specifies the power-on state of the Numlock feature on the
numeric keypad of the keyboard.
To Next Page
Loading...
Need help?
General
