Intel Enabled Reference Solution Information
148 Thermal and Mechanical Design Guidelines
Table 7-10. Balanced Technology Extended (BTX) Reference Thermal Solution
Providers
Supplier Part
Description
Part
Number
Contact Phone Notes
Mitac
International
Corp
Support and
Retention
Module
_ Michael Tsai 886-3-328-9000
Ext.6545
1
AVC*
(ASIA Vital
Components
Co., Ltd)
Type I Thermal
Module Fan
Assembly
2004
DB09238B1
20084
David Chao +886-2-22996930
Extension: 619
2
AVC*
(ASIA Vital
Components
Co., Ltd)
Type II Thermal
Module Fan
Assembly
2004
DB07038B1
2UP001
David Chao +886-2-22996930
Extension: 619
3
TBD Type II Thermal
Module Fan
Assembly
65 W
775_VR_CONFIG
_06
TBD TBD TBD 4
CCI
(Chaun-Choung
Technology
Corp.)
Extrusion TBD Harry Lin
Monica Chih
714-739-5797
+886-2-29952666
Extension 131
AVC
(ASIA Vital
Components
Co., Ltd)
Fan and Duct TBD David Chao +886-2-22996930
Extension: 619
NOTES:
1. Part numbers were not available at the time of release of this document. Contact the
company for part number identification prior to the next revision of this document.
2. The user should note that for the 2004 Type I Intel reference Thermal Module
Assembly: also meets 2005 Performance (130 W) and Mainstream (84 W) as well as
the 2004 Performance 775_VR_CONFIG_04 (115 W).
3. The user should note that for the 2004 Type II Intel reference Thermal Module
Assembly: meets the requirements for 115W 2004 Performance 775_VR_CONFIG_04
and 95 W 2005 Mainstream 775_VR_CONFIG_05.
4. The Type II TMA designed for 65 W 775_VR_CONFIG_06 has been optimized for
acoustics and cost. It is not interchangeable with the 95 W Type II reference design.
Note: These vendors/devices are listed by Intel as a convenience to Intel's general customer
base, but Intel does not make any representations or warranties whatsoever regarding
quality, reliability, functionality, or compatibility of these devices. This list and/or
these devices may be subject to change without notice.
§
To Previous Page
Loading...
Need help?
General
