Intel ETHEREXPRESS PRO/100 User Manual

3-8 PRO/100 LAN+Modem PC Card User’s Guide
Windows NT Driver Parameters Reference
M16B.SYS (NDIS 3) Settings for Microsoft Windows NT
M16B.SYS is an NDIS 3 network interface card (NIC) driver. It conforms
to the Microsoft Network Driver Interface Specification (NDIS). It
supports both Windows NT and Windows 95.
Caution
Under most circumstances it will not be necessary to make
modifications directly to the registry. Incorrect settings can
result in undesirable changes to the configuration of Windows
95 or NT. The M16B.SYS driver supports the networking
environment in Microsoft Windows NT versions 3.51 and
greater.
The files necessary for using M16B.SYS include:
For Windows NT 4.0
M16B.DLL Intel PRO/100 installation DLL
OEMSETNT.INF Intel installation file for Windows NT
MDMM16B.INF Modem support file for Windows NT 4.0
M16B.SYS Intel NDIS 3 driver for Windows NT
For Windows NT 3.51
M16B.DLL Intel PRO/100 installation DLL
OEMSETNT.INF Intel installation file for Windows NT
MODEM.IN_ Compressed modem support file for
Windows NT 3.51
M16B.SYS Intel NDIS 3 driver for Windows NT
There are user-configurable parameters to the M16B.SYS driver which can
be modified using the Network Control Panel built into Windows NT.
This applet uses the OEMSETNT.INF file to set the corresponding
parameters in the registry. The user-configurable parameters are as
follows:

Intel ETHEREXPRESS PRO/100 Specifications

General

Brand	Intel
Model	ETHEREXPRESS PRO/100
Category	Computer Hardware
Language	English