Intel S2600CW User Manual

Intel® Server Board S2600CW Family TPS Intel® Light Guided Diagnostics
Revision 2.4
119
9.4 System ID LED, System Status LED, and POST Code Diagnostic
LEDs
The server board provides LEDs for system ID, system status, and POST code. These LEDs are
located in the rear I/O area of the server board as shown in the following figure.
Callout
Description
A
System Status LED
B
System ID LED
LSB 1 2 3 4 5 6 MSB
POST Code Diagnostic LEDs
Figure 25. Location of System Status, System ID, and POST Code Diagnostic LEDs
9.4.1 System ID LED
You can illuminate the blue System ID LED using either of the following two mechanisms:
 By pressing the System ID Button on the system front control panel, the ID LED
displays a solid blue color until the button is pressed again.
 By issuing the appropriate hex IPMI “Chassis Identify” value, the ID LED will either blink
blue for 15 seconds and turn off or will blink indefinitely until the appropriate hex IPMI
Chassis Identify value is issue to turn it off.

Intel S2600CW Specifications

General

Brand	Intel
Model	S2600CW
Category	Server Board
Language	English