EasyManuals Logo
Home>Interlogix>Security System>Caddx

Interlogix Caddx User Manual

Interlogix Caddx
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
LED Keypad
ARMING YOUR SYSTEM IN THE STAY AND NIGHT MODES
STAY is used when the user is inside the premise and wants protection around the
perimeter.
1.
Close all protected doors and windows.
Ready
light
must be on or flashing when all protected zones and sensors
are secure. The system will not arm if the
ready light
is not on or flashing.
NOTE
:
If any zones are bypassed, a sensor in that zone can be violated
without affecting the
ready light.
If the
power light
is off, you have no AC power. Restore power if possible.
If not, contact your installing company listed on page 1 of this booklet for
service.
2.
Enter your 4 or 6 digit user code.
If Auto Bypass is enabled, all interior zones will be bypassed if you do
not leave through a designated entry/exit door. Omit Step 3.
3.
Press [
STAY
].
The
stay key
will illuminate indicating that all interior zones are bypassed.
(All interior devices will bypass automatically, giving the user freedom of
movement within the interior area.) The
away
and
night
keys will flash
during the exit delay.
The
bypass key
will illuminate if any zone(s) are bypassed. If any zone(s)
have been bypassed previously by the user, the light(s) corresponding to
the bypassed zone(s) will illuminate, alerting the user that a zone(s) may
be unprotected and can be faulted without an alarm.
4.
To toggle between the STAY and NIGHT mode, double press the key
corresponding to the mode you desire.
5.
To upgrade from the STAY or NIGHT mode to the AWAY mode, double press
[
AWAY
].
Note
: Once the AWAY mode is activated, the system must be
disarmed to revert to the STAY or NIGHT mode.
USING THE QUICK ARM (Optional, see page 1)
The Quick Arm feature may be used if it is enabled. Quick Arm will allow the user to
arm the security system in the AWAY, STAY, or NIGHT mode by pressing the
corresponding key twice. This feature is used for ARMING ONLY, and will not disarm
the security system. This is ideal for a maid or baby sitter, etc.
CHANGING MODES WHILE SYSTEM IS ARMED (Optional, see page 1)
Double pressing the [
AWAY
], [
STAY
], or [
NIGHT
] key will change to the corresponding
mode. Once the AWAY mode is entered, the system must be disarmed to change
modes.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Interlogix Caddx and is the answer not in the manual?

Interlogix Caddx Specifications

General IconGeneral
BrandInterlogix
ModelCaddx
CategorySecurity System
LanguageEnglish

Related product manuals