24 Roomba 800 Series Owner’s Manual
EN
At the end of a cleaning cycle or when Roomba’s battery is running low, it returns
to the Home Base to charge. Roomba needs to find the infrared signal of the Home
Base in order to return.
• Always keep the Home Base plugged in. When the Home Base is plugged
in, its power light blinks to indicate the Home Base is connected to the
power source.
• If Roomba returns to the Home Base and is unable to dock, it will try again
until it docks successfully.
• When Roomba makes a connection and docks successfully, the Home
Base power light stops blinking and turns solid green.
• Within a minute of docking, Roomba goes to sleep with just the battery light
illuminated to show charging status.
Home Base Location
Position the Home Base on a hard, level surface against a wall. Make sure it’s at least
1.2 metres (four feet) from any stairs and that Roomba has a clear path to reach it.
Home Base
®
Do not place the Home Base within 1.2 metres (four feet) of a staircase.
To Next Page
Loading...
Need help?
General
