Roomba 800 Series Owner’s Manual 25
EN
The Remote Control lets you conveniently control Roomba’s functions. You can use
it to turn Roomba on and off and steer it around your room without bending down.
It also gives you remote access to these commands:
Before using your remote for the first time, install 2 AA batteries.
Remote Control
SPOT Roomba spirals approximately 1 metre (three feet)
in diameter and then spirals back to where it started,
intensely cleaning a local area.
CLEAN Roomba automatically calculates the room size and adjusts its
cleaning time appropriately.
Dock Roomba attempts to dock on the Home Base
®
, if present.
Make sure there is a direct line of sight from the remote control to Roomba and
that the remote is pointed at Roomba.
The remote control, Virtual Wall
®
, Lighthouse
TM
and Home Base operate using
an invisible infrared beam. If they are all used in the same area, Roomba may
see multiple infrared signals and will not operate. The remote WILL NOT work
when Roomba is near a Virtual Wall.
Directional
Buttons
SPOT Button
CLEAN / Power Button
Dock Button
(optional accessory for all models)
To Next Page
Loading...
Need help?
General
