Roomba 800 Series Owner’s Manual 33
EN
Problems While Charging
Roomba
blinks…
Roomba
displays…
Roomba
says…
Likely cause What to do
1 time Err 1 Charging
error 1
Roomba’s
battery isn’t
connected.
Confirm Roomba’s battery pull
tab is removed. Remove
Roomba’s battery cover, then
remove and reinstall battery
(see page 35).
2 times Err 2 Charging
error 2
Roomba has a
charging error.
Let Roomba cool down
for at least an hour and try
charging again.
3 times Err 3 Charging
error 3
Roomba has a
charging error.
Contact customer support.
5 times Err 5 Charging
error 5
Roomba has a
charging error.
Confirm Roomba’s Home
Base
®
is installed properly (see
page 24). Please wipe contact
points clean on Roomba and
Home Base
®
.
6 times Err 6 Charging
error 6
Roomba’s
battery is
too warm.
Let Roomba cool down
for at least an hour and try
charging again.
7 times Err 7 Charging
error 7
Roomba’s
battery
isn’t cooling.
Let Roomba cool down
for at least an hour and try
charging again.
To reset Roomba’s software, hold down the CLEAN button for 10 seconds.
This will clear all scheduled cleaning times, reset the clock and resolve some
software issues.
Error 10.
Spin Roomba’s
side wheels to
clean.
Roomba’s side
wheel is stuck,
or its bumper
isn’t detecting
obstacles.
If Roomba is circling, clean its side wheels of hair and
debris. Push the wheels in and out, and check that
they both turn freely. If it's not circling, Roomba may
be in a very large room. Use a Virtual Wall
®
to create a
smaller cleaning area.
Error 11. Roomba has
an internal error.
Call iRobot Customer Service.
To Next Page
Loading...
Need help?
General
