EasyManuals Logo

iRobot Roomba User Manual

iRobot Roomba
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32 Roomba 800 Series Owner’s Manual
EN
Troubleshooting
Roomba will tell you something is wrong with a two-tone “uh-oh” sound followed by
a narrated voice. The troubleshooting light will also blink. Refer to the chart below to
resolve Roomba’s problem. If the problem is not resolved, visit global.irobot.com.
Runtime Errors
Roomba blinks
and says …
Likely cause What to do
Error 1.
Move Roomba to a
new location, then
press CLEAN
to restart.
Roomba is
stuck with a
wheel hanging
down.
Ensure Roomba’s wheels are firmly on the floor. If
Roomba is stuck, start in a new location. If Roomba
is not stuck, clean its side wheels of hair and debris.
Push the wheels in and out, and check that they
both turn freely.
Error 2.
Open Roomba’s
extractor frame
and clean
extractors.
Roomba’s
extractors
can’t turn.
Remove and clean Roomba’s extractors and caps.
Clean Roombas side wheels of hair and debris.
Error 5.
Spin Roomba’s
side wheels
to clean.
Roomba's side
wheel is stuck.
Clean Roomba’s side wheels of hair and debris. Push
the wheels in and out, and check that they both turn
freely. Start Roomba in a new location.
Error 6.
Move Roomba to a
new location, then
press CLEAN
to restart.
Roomba’s cliff
sensors are
dirty, it is hang-
ing over a drop
or it is stuck on
a dark surface.
If Roomba is stuck, start in a new location.
If Roomba is not stuck, wipe its cliff sensors with a
dry cloth. Start in a new location.
Error 7.
Spin Roomba’s
side wheels to
clean.
Roomba’s side
wheel is stuck.
Clean Roomba’s side wheels of hair and debris. Push
the wheels in and out, and check that they both turn
freely. Start Roomba in a new location.
Error 8. Roomba’s fan
is stuck.
Remove and empty Roomba’s bin. Then, briskly tap the
bin to loosen any remaining trapped debris.
Error 9.
Tap Roomba’s
bumper to clean.
Roomba’s
bumper is
stuck, or the
bumper sensor
is dirty.
Briskly tap Roomba’s bumper several times to dis-
lodge any debris that may be trapped underneath.
To repeat Roomba’s error message, press CLEAN.

Other manuals for iRobot Roomba

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the iRobot Roomba and is the answer not in the manual?

iRobot Roomba Specifications

General IconGeneral
BrandiRobot
ModelRoomba
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals