ITech IT6322A User Manual

Acceptance and Installation
Copyright © Itech Electronic Co., Ltd. 1
Chapter1 Acceptance and Installation
Power supply is a high level safety equipment, there is a protected ground
terminal. Before Installation or operation, please read the safety signs and
instructions in this manual.
1.1 Confirm package contents
Open the package and check the articles within package box before operation.
In case of any non-conformity, missing or appearance wearing, please contact
ITECH immediately.
The package box should comprise:
Device name
Quantity
Model
Remarks
Power supply
x1
IT6300
series
IT6300 series include:
IT6322A/IT6332A/IT6333A/
IT6322B/IT6332B/IT6333B/
IT6322C/IT6332C/IT6333C
Power Cord
x1
IT-E171/IT
-E172/
IT-E173/IT
-E174
The User may select different
power cords based on local
outlet specification. For
detailed specifications, refer
to 1.5 Connecting the Power
Cord.
USB communication
cable
x1
-
-
CD
x1
-
It contains User’s Manual and
Programming Guide.
Ex-factory Test
Report
x1
-
It is the test report of the
instrument before delivery.
NOTE
After confirming that package contents are consistent and correct, please appropriately
keep package box and related contents. The package requirements should be met
when the instrument is returned to factory for repair.
The IT6300 series power supply has the following optional accessories sold
separately:
Equipment Name
Model
Description
Rack Mount Kit
IT-E151/
IT-E151A
Select this accessory when you need to
install the instrument on a dedicated
stand. IT-E151A is only available for
IT6322A/IT6322B/IT6322C.

ITech IT6322A Specifications

General

Brand	ITech
Model	IT6322A
Category	Power Supply
Language	English