Quick Start
Copyright © Itech Electronic Co., Ltd. 8
Right/Left key, use to move the cursor or scroll through the menu
items.
Up/down key, used to increase or decrease the setting value.
(Shift)+1,
(Shift)+2,
(Shift)+3
Used to turn on the output of corresponding channel no matter in
menu operation or Meter state.
2.4 Introduction of Indicators on the Screen
In constant current mode.
In constant voltage mode.
Keyboard operation for the lock mode.
Open the remote sense function.
Indicates the shift button is pressed.
Indicates the channel currently selected.
2.5 Introduction to the Rear Panel
The rear panel of IT6322B/IT6332B/IT6333B is shown in the next figure.
The rear panel of IT6322A/IT6332A/IT6333A is shown in the next figure.
To Next Page
Loading...
Need help?
General
