ITech IT7622 Programming Guide

System Commands
Copyright© Itech Electronic Co., Ltd. 62
Returns
<AC|DC|ACDC>
[SOURce:]NORMal:WAVE
This command is used to set the wave of a phase.
Command syntax
[SOURce:]NORMal:WAVE <A>,<value>
Arguments
<A>
<value> wave index（0-sine,1-square,2-Sawtooth,3-Triangle,4-THDWave）
Query syntax
[SOURce:]NORMal: WAVE? < A>
Returns
<value>
[SOURce:]NORMal:THD:ORDer:DATA
This command is used to set the THD order data.
Command syntax
[SOURce:]NORMal: THD:ORDer:DATA <A>,<string>
Arguments
<A>
<string> String (”order number, thd float value, angle value”)
Example
Example：NORMal:THD:ORDer:DATA A,”5,0.1,350” Set the thd of 5th harmonic
to 0.1, and angle to 350 degrees.
Query syntax
[SOURce:]NORMal: THD:ORDer:DATA? <A>,<value>
Returns
<string>
[SOURce:]NORMal:THD:DOWNload
This command is used to download the THD configuration.

ITech IT7622 Specifications

General

Brand	ITech
Model	IT7622
Category	Power Supply
Language	English