ITech IT7622 Programming Guide

System Commands
Copyright© Itech Electronic Co., Ltd. 83
Chapter12 Common Commands
*CLS
This command clears the following registers:
⚫ Standard event register
⚫ Query event register
⚫ Status byte register
Command syntax
*CLS
Arguments
None
*ESE
This command can set the parameter of standard event enable register.
Setting parameter can determine which bit of standard event register is 1
and the byte will enable ESB of status byte register is 1.
Register description:
Standard Event Status Register
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
PON
NU2
CME
EXE
DDE
QYE
NU1
OPC
OPC:Operation Complete
NU1：Retain 1
QYE: Queryerror
DDE：Device-dependent error
EXE：Execution error
CME：Command error
PON：Power-on has occurred
Command syntax
*ESE <value>
Arguments
0～255
Default set
Refer to *PSC command

ITech IT7622 Specifications

General

Brand	ITech
Model	IT7622
Category	Power Supply
Language	English