Configuration Arbitrary Waveform
Copyright ©ITECH Electronic Co., Ltd. 63
Description: display list file name.
Repeat: Edit the cycles of the List file. By defalt select to Infinite, this setting can
be select to Count, set the count number and end state.
End: Set the final waveform, with the following options available:
z Stop: directly stop the waveform output after operation.
z Last: keep the last waveform output unchanged after operation.
Export: Export the List file to USB disk.
Save: save the list file to local momery.
Config: enable the list parameter.
Clear all: clear all of the list settings.
3. Click on screen to set the ACrms, Freq and Time, if need to set other
parameters such as phase control or step running control, you can click
More to enter the advanced menu.
List parameter description˖
Step1 voltage amplitude and slew rate.
To Next Page
Loading...
Need help?
General
