ITech IT7900P Series User Manual

Source Mode Operation
Copyright ©ITECH Electronic Co., Ltd. 69
Interface Instruction
Take IEC 61000-4-11 as an example to introduce the interface display and how
to use the regulation test.The usage method of other regulatory interfaces is the
same, but the displayed parameters are different.
⚫ Standards Selection Area
In the Standards selection area, users can select the regulation to be tested.
Each option is described as follows:
Standards
Select the regulations to be tested.
the following regulations are supported:
⚫ IEC 61000-4-11
⚫ IEC 61000-4-13
⚫ IEC 61000-4-14
⚫ IEC 61000-4-28
Category
Test items defined by standard regulations.The third class
projects are divided into several sub-projects according to
the requirements defined by regulations, and customers
select them according to the level of needs.
Voltage dips
short interruptions
Voltage variations
Voltage
Voltage value of AC output. User can setting the voltage
level according to the DUT requirements.
Frequency
Frequency value of AC output. Different regulatins have
different definitions. This parameter can be set only for
User defined categories.
Standards Selection Area
Standards Edit Area

ITech IT7900P Series Specifications

General

Brand	ITech
Model	IT7900P Series
Category	Power Supply
Language	English