Copyright © ITECH Electronic Co., Ltd. 1
Chapter1 Inspection and Installation
1.1 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If
wrong items have been delivered, if items are missing, or if there is a defect with
the appearance of the items, contact the dealer from which you purchased the
instrument immediately. The package contents include:
Checklist of Package Contents
IT8600 series including:
IT8615/IT8615L/IT8616/IT8617
/IT8624/IT8625/IT8626/IT8627
/IT8628
IT-E171/IT-E172/
IT-E173/IT-E174
User may select an appropriate
power cord that matches the
specifications of power socket used
in the area. See the Section 1.3
Connecting the Power Cord.
The test leads are not the standard
accessories for IT8615 and
IT8615L.
It contains IT8600 electronic load
User’s Manual, Programming Guide
and other user documentations.
It is the test report of the instrument
before delivery.
NOTE
Upon verification of the shipment, keep the package and relevant contents thereof in a
safe place. When returning the instrument for warranty service or repair, the specified
packing requirements shall be met.
1.2 Instrument Size Introduction
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the electronic load
size.
IT8616 and IT8617 have two sizes, including side plate structure and 15U
cabinet. Besides, the 15U cabinet of IT8617 also has two types: one consists of
one master and two slaves and the other consists of three masters. You can
choose according to your requirement.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
