ITech IT8625 User Manual

Routine Maintenance
Copyright © ITECH Electronic Co., Ltd. 74
Chapter8 Routine Maintenance
This chapter describes the general maintenance items and methods for IT8600
AC/DC load.
8.1 Error Information Reference
IT8600 AC/DC load can provide detailed error and prompt information to help
the user easily locate problems and implement measurement during
measurement and operation.
This section introduces all error information, causes and troubleshooting of
IT8600 AC/DC load, and lists all prompt information.
Prompt information list
Prompt Information
Voltage range has reach the lowest limit
Current range has reach the lowest limit
Voltage base has reached the highest limit
Current base has reached the highest limit
Voltage trig level has reached the highest limit
Current trig level has reached the highest limit
Trig delay has reached the lowest limit
Time base has reach the lowest limit
Voltage range has reached the highest limit
Current range has reached the highest limit
Voltage base has reach the lowest limit
Current base has reached the lowest limit
Voltage trig level has reached the lowest limit
Current trig level has reached the lowest limit
Trig delay has reached the highest limit
Time base has reached the highest limit
Time set ok
Local has been locked
Remote state
Key has been locked
Protect clear
not used in current state!
Save4 is performed
Save3 is performed
Save2 is performed
Save1 is performed
Recall4 is performed
Recall3 is performed
Recall2 is performed
Recall1 is performed
Save screen ok
Log stop
Log start
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

ITech IT8625 Specifications

General

Brand	ITech
Model	IT8625
Category	Test Equipment
Language	English