registered more than 1 base unit to your handset.
Q3. The phone book memories do not work as expected!
A3. Make sure you do not enter telephone number longer than limits mentioned in the phone
book section.
A3. If your phone is connected behind a PABX system, consult your system provider for
information of timed pause delay required to make an external call.
Q4. Caller’s number does not show on my phone!
A4. Make sure your phone line is provided with caller ID function from the phone service provider.
In most countries, caller ID function must be paid and subscribed separately from normal
phone function. For details, please consult phone service provider.
A4. Callers may suppress their caller’s number when making their phone call. Caller’s number
does not necessary display when a call is received. For details, please consult phone service
provider.
A4. If a call is made from abroad, caller’s number cannot be transmitted.
Q5. My handset does not work after I have registered my handset to a base unit from
different maker!
A5. According to DECT standard (GAP compatible), handset can be registered to any DECT
system base unit. However, maker specific functions may not be compatible between
products. It may happen that only basic function can be operated if handset and base unit
from 2 makers are registered together.
A5. Check if the other base unit is GAP compatible according to DECT standard. Only GAP
compatible products can be compatible to each other.
To Next Page
Loading...
Need help?
General
