E. NORMAL OPERATION
E.1 TO MAKE A NEW CALL
1. You can only make call with your handset. You cannot make call from your base unit.
2. On the handset, press the
button and the When you hear the dial tone, enter the
telephone number to be called. Entered number will be dialed automatically. After a short
delay, the call timer will start timing the call.
4. Press the
button to exit and return to standby mode.
E.2 TO RECEIVE A CALL
1. You may receive calls through the handset only. When you receive a call, the handset(s) will
ring as long as the handset ring volume is not set to off. The telephone icon on the handset
screen will flash.
2. If you have subscribed to caller ID service with your telephone operator, caller’s number will
show on the screen while the handset is ringing. If the caller’s number is stored already in the
Phone Book of your handset (refer to the Phone Book section), the matched name will be
displayed on the handset display screen when the phone receives a call.
3. Simply push the
button to answer the call or simply lift the handset from the base.
(providing the automatic call pick-up is set to on, see the section of “Automatic call pick-up
section). After a short delay, the call timer will start timing the call.
4. To end a call, push
button on the handset to disconnect the line.
E.3 TO MAKE & RECEIVE INTERNAL CALLS (INTERCOM)
In a standard package, your phone comes with a handset and a base unit. Depending on the
package you have purchased (please consult product packaging), separate handset may be
included for extended usage.
Internal communication (INTERCOM) can be made between handsets – like intercom, call transfer
& conference conversation.
To Next Page
Loading...
Need help?
General
