12
3.1 Important Safety Instructions
When using this electrical equipment, basic safety precautions should always be followed,
including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. A green colored terminal or a terminal marked G, Gr, Ground, Grounding or the
symbol is located inside the supply terminal box or compartment. To reduce the risk
of electric shock, this terminal must be connected to the grounding means provided
in the electric supply service panel with a continuous copper wire equivalent in size
to the circuit conductors that supply this equipment.
3. At least two lugs marked “Bonding Lugs” are provided on the external surface or on
the inside of the supply terminal box/compartment.
For the equipotential connection
as required by specic national standards, the installer must use the above terminals (stan-
dard EN 60335.2.60). In particular, an equipotential condition must be established for all
metallic masses surrounding the spa, for example water and gas pipes, metallic platforms,
and so on.
4. SAVE THESE INSTRUCTIONS.
To Next Page
Loading...
Need help?
General