46
13.3 Other Additives
Many other additives are available for your swim spa. Some are necessary to compensate for
out of balance water, some aid in cosmetic water treatment and others simply alter the feel
or smell of the water. With our chemical products your authorized Jacuzzi dealer can advise
you on the use of these additives. Jacuzzi chemicals are for use in the U.S. only.
13.4 CLEARRAY® (Ultraviolet) Water Purication System
CLEARRAY Water Purication System is exclusive technology utilizing natural ultraviolet
technology to eliminate waterborne bacteria, viruses and algae in swim spas. The ultraviolet
light otherwise known as UV-C or germicidal light inactivates the microorganisms disrupt-
ing the DNA so that it cannot reproduce and is considered lifeless. CLEARRAY is plumbed
in-line with your ltration system. After the water is drawn from the pump, lter and heater
it is directed through the CLEARRAY system. Water passes through an ultraviolet light en-
ergy that treats and disinfects the water. The water is then pumped back into the swim spa
giving you crystal clear water instantly. The system has a ballast that is the power supply for
the purication system; it has two LED indicator lights. The “Power On” (red color) indicat-
ing incoming power ow and the “Lamp On” (green color) indicating the system is properly
working. CLEARRAY is standard on all models.
After a year the bulb must be replaced. If the CLEARRAY timer has been programmed cor-
rectly a message will appear on the LCD display when the time allotted has expired. In order
to clear the message, a new CLEARRAY UV bulb needs to be installed and the time must be
reset. Contact your authorized Jacuzzi dealer to assist in changing our the bulb.
14.0 Error / Display Messages
There are a number of unique functions designed into your Jacuzzi swim spa to protect it
from damage and / or to aid in troubleshooting. When this occurs the swim spa will notify
you by showing the screen below, Figure 14.0a. A solid white light indicates that all opera-
tions are normal. A solid red light indicates that immediate attention is required to clear or
x an error code. Following is a list of all the possible messages along with their meanings.
Always insist on genuine Jacuzzi replacement parts.
Note: if you tap “X” the display will change to Figure 14.0b. The error icon will remain on the
screen as a reminder. If the error is not taken care of or xed, the error display will reappear
in 2 hours, Figure 14.0a.
To Next Page
Loading...
Need help?
General