26
Press Up or Down to display the Set Temperature (indicated by a ashing
o
F
or
o
C, plus a change in colour of the temperature). Press up or Down again to
modify the Set Temperature. The Set Temperature changes immediately.
If you need to switch between High Temperature Range and Low Tempera-
ture Range you need to go to the Settings Screen.
10.2 Navigation
• Navigating the entire menu structure is done by touching the screen.
• The two screen selections indicated below can be selected. Touch one of these to
enter a dierent screen with additional controls.
• Most menu screens time out and revert to the main screen after 30 seconds of no
activity.
• At the bottom of the screen, at certain times an indicator may appear showing that a
message is waiting. Touch this indicator to go to the Message Display Screen. On that
screen some of the messages can be dismissed.
NAVIGATION
Settings Spa Equipment
MESSAGES
A warning message is waiting
10.3 The Spa Screen
The Spa Screen shows all available equipment to control. The display shows icons that are re-
lated to the equipment installed on a particular swim spa model, so this screen may change
depending on the installation. The icon buttons are used to select and control individual
devices.
Some devices, like pumps, may have more than one ON state, so the icon will change to re-
ect the state of the equipment. Below are some examples of 2-speed pump indicators.
Jets O Jets Low Jets High
To Next Page
Loading...
Need help?
General