Prt-03(printing in English) Prt-03（CK printing in Chinese）
When the window of unit weight shows , the printing format of accumulation display
is as follows
NOTE:
The printing sample could be of different kinds of formats. When there is specific demand
about the format, conduct as follows
1) As for BRICH/GODEX/ZEBRA/GP printers, the factory designs the format as planned and
email to the user. Add the format into the previous format file via computer. Then it is
successful to add the new format and able to print the new format.
2) As for DMP and CK printers, it needs to change the scale design
Appendix 2：Exporting data to PC in the form of EXCEL
Introduction:
Connect the scale with PC and set the parameter of external device as ―EXCEL‖ on the scale,
then you could export the weighing data to PC in the form of EXCEL. With this function, you
could record/accumulate/average/data statistical analysis the testing data, which we could
call it as scale-computer data management function.
Note: pls enable ―Use Serial Keys‖ function in the computer.
Hardware connection and settings
1. Use transmitting serial wire or USB wire to connect scale and pc.
Note: pls install usb driver first, if you use usb wire.
2. Parameter settings in scale:
To Next Page
Loading...
