Jadever JCN User Manual

11
2) Press key  /MR or TARE/  to shift and key M-/HI or PRINT/LO
to modify the value (or via numeric keys)
3) Press key G N/SET to start or close weighing checking
4) Press key M+/SAVE to confirm and save. Press key ZERO/ESC to return to weighing
mode without saving.
Put the sample on the weighing pan.
HI indication appears, when the item on the weighing pan is greater than the upper limit
OK indication appears, when the item on the weighing pan is between upper and lower limits.
LO indication appears, when the item on the weighing pan is smaller than lower limit
Note: the item on the weighing pan should be more than or equal to 20e.
When changing the Hi-Lo value, the scale will activate the weighing checking function
automatically. If the Lo value is higher than Hi value, then the Hi value will become the
same value as Lo data.
7-3-2 Upper & Lower Quantity Limit Checking
Upper Quantity Limit
1） Long press key M-/HI under the weighing mode.
The number leftmost is blinking.
2）Press key  /MR or TARE/  to shift and key M-/HI or PRINT/LO
to modify the value (or via numeric keys)
3）Press key G N/SET to start or close weighing checking
4）Press key M+/SAVE to confirm and save. Press key ZERO/ESC to return to weighing
mode without saving.
Lower Quantity Limit
1) Long press key M-/HI under the weighing mode.
The number leftmost is blinking.
2) Press key  /MR or TARE/  to shift and key M-/HI or PRINT/LO
to modify the value (or via numeric keys)
3) Press key G N/SET to start or close weighing checking
4) Press key M+/SAVE to confirm and save. Press key ZERO/ESC to return to weighing
mode without saving.
Put the sample on the weighing pan.
HI indication appears, when the item on the weighing pan is greater than the upper limit

Jadever JCN Specifications

General

Brand	Jadever
Model	JCN
Category	Scales
Language	English