Content
Appendix 1: Printing format
Appendix 2: Exporting data to PC in the form of EXCEL
Appendix 3: U.KEY Conector
1. Introduction …………………………………………………………………….….….1
2. Precaution……………………………………………………....................................1
3. Before Using the Product
3-1 Unpacking and Checking………………………………………………….……….…...1
3-2 Installing Components.……………………………………..……………………….…..1
3-3 Leveling the Scale………………………………………..…………………….….........1
4. Product Introduction
4-1 Specifications & General Features ………………………………………….…………2
4-2 Front Panel …………………………………………………………………….…………3
4-2-1 Display …….……………………………………………………… ………….…….....3
4-2-2 Keyboard…………………………………………………………………….……….....4
4-3 Power Supply……………………………………………………….......…….…….…….5
5. Setting Mode
5-1 Function Setting………………………………………….…………………………….…5
5-2 Parameters………………………………………….……………………………….....…6
6. Single and Multi-point Calibration………………………………….…....…….8
7. Operation
7-1 Weighing………………………………………………………………………………..…9
7-2 Tare & Preset Tare……………………………………………………………….….……9
7-3 Checking function
7-3-1 Upper & Lower Weight Limit Checking ………………………………………..……10
7-3-2 Upper & Lower Quantity Limit Checking ….…………………………………...……11
7-4 Basic Counting
7-4-1 Entering a Known Unit Weight and Unit weight Memory………………….………12
7-4-2 Sample Counting and ACAL………………………………………………………….13
7-5 Accumulation, Accumulation Display and Accumulation Clear………………..........13
7-6 Initialization of the Scale to Printer (Optional)……………………………….……..…14
7-7.The Control from PC to Scale (Optional)…………………………………….……..…15
8. Serial Interface
8-1 RS-232 Connector……………………………………………………………………….15
9. Troubleshooting and Error Message……………………………………...…15
To Next Page
Need help?
General
