Janome JR3203N-BC User Manual

Specifications
Desktop Robot JR3000
12.4 CC-Link
12.4.1 Connector Diagram
This module has two status LEDs and one CC-Link connector.
#
Name
1
Run (RUN) (LED)
2
Error (ERR) (LED)
3
CC-Link Connector
12.4.2 Run (RUN) / Error (ERR)
By looking at the Run (RUN) and Error (ERR) LED combinations you can confirm the following
statuses:
Configuration Settings
(related to the Master/Slave value settings)
CC-Link Module Front LED
Data exchange Stations Occupied
Expansion Cyclic
Setting
RUN ERR
Yes
Agreement
Agreement
ON
OFF
No
Agreement
Disagreement
ON
OFF
No
Disagreement
Agreement
OFF
OFF
No
Disagreement
Disagreement
OFF
OFF
12.4.3 Connector Pin Assignment
PIN No.
Name
Function
1
DA
RS485 RxD/TxD (+)
2
DB
RS485 RxD/TxD (-)
3
DG
Signal ground
4
SLD
Shield ground
5
FG
Frame ground
12.4.4 Settable Contents
Settable Items
Setting/Selection Range
Function
Station Number 1 – 64
You can set station numbers 1 – 64. The
CC-Link remote device station is distinguished
by its station number. If you are connecting
multiple slaves, please choose and set
available station numbers.
Transmission Speed
Specification
156kbps
625kbps
2.5Mbps
5Mbps
10Mbps
If you increase the transmission speed, the
transfer distance is shortened.
156kbps 1200m
625kbps 900m
2.5Mbps 400m
5Mbps 160m
10Mbps 100m
1
2
1
CC-Link
ERRRUN
83

Janome JR3203N-BC Specifications

General

Brand	Janome
Model	JR3203N-BC
Category	Sewing Machine
Language	English