Janome MC500e User Manual

28
MC450e
Replacing the Switching Power Supply
To remove:
1. Remove the face cover, bottom plate, bed cover
and rear cover (refer to pages 1, 2, 3 and 4).
2. Remove the connector from the switching power
supply.
3. Remove the setscrew (A) and (B) to remove the
switching power supply.
To attach:
4. Follow the above procedure in reverse.
Switching
power supply
Connector
Setscrew (A)
Setscrew (B)

Janome MC500e Specifications

General

Brand	Janome
Model	MC500e
Category	Sewing Machine
Language	English