Operation
Drive Controls
52 9821/6100-4 52
Drive Controls
Track Controls
WARNING When the cab is swung around so that it is facing the track motor end of the undercarriage, the
action of the track controls is reversed. Take extra care!
The tracks are controlled using the control levers in front of the operator seat.
The left control lever controls the left track. The right control lever controls the right track.
The two levers can be operated individually or together as necessary to move the machine as required. The
control levers are spring loaded to a central position. In this position the tracks do not operate.
The control levers can be operated using one hand or both.
Figure 39.
A Control levers
Hand Throttle Control
A hand operated throttle lever on the right console in the cab controls the speed of the engine.
Move the lever to increase or to decrease the engine speed. The lever can be left in any position between
idle and maximum as required.
Figure 40.
A Hand throttle control + Increase the engine speed
- Decrease the engine speed
To Next Page
Loading...
Need help?
General
