Operation
Operating Environment
137 137
9811/9950-1
4 Keep the radiator/oil cooler clean, regularly remove
dirt and debris from the radiator/oil cooler and the
engine.
5 Check the fan belt regularly.
6 Check the air vents. Make sure that the air vents to
and from the engine compartment are not blocked.
7 Check the engine pre-cleaner regularly (if fitted).
8 Check the battery electrolyte level.
Operating in Dusty or Sandy Areas
1 Air Cleaner. Frequently check, clean or replace the
elements regardless of the inspection interval. (Not
the safety element).
2 Securely tighten the hydraulic oil tank filler cap to
prevent sand and dust from entering the
hydraulic system.
Operating in Coastal Regions
1 Check that all the plugs, bolts and fasteners are all
tightened properly.
2 After daily operations, wash the machine thoroughly
and take special care when cleaning the electrical
devices and hydraulic cylinders to prevent salt entry
and eventual corrosion.
Operating on Wet or Soft Ground
1 Clean the Machine.
Moisture or mud will cause the paint, wiring and
metallic parts to deteriorate. When operating the
machine keep it as dry as possible and regularly
grease the machine.
To Next Page
Need help?
General
