Routine Maintenance
Cleaning the Machine
197 197
9811/9950-1
4 Do not allow debris to accumulate around the engine,
pay particular attention to the exhaust area, remove
all combustible material.
5 Thoroughly dry piston rams and protect with clean
transmission or hydraulic oil if necessary.
Cleaning the Tracks
P11-3003
!MWARNING
If two people are doing this job make sure that the
person operating the controls is a competent operator.
If the wrong control lever is moved, or if the controls
are moved violently, the other person could be killed
or injured.
If you will be working with another person, make sure
that you both understand what is to be done. Learn
and use the recognised signalling procedures. Do not
rely on shouting - he will not hear you.
To clean the tracks, you must turn them. When the
tracks are turning, keep clear of rotating parts. Before
starting this job, make sure that you have no loose
clothing (cuffs, ties etc.) which could get caught in
moving parts. Keep people not involved with this job
well away!
MD-3-3-2
To Next Page
Loading...
Need help?
General
