45 45
9811/9950-1
Operation
Introduction
T2-006_2
The aim of this part of the manual is to guide the operator
step-by-step through the task of learning how to operate
the machine efficiently and safely. Read the Operation
section through from beginning to end.
Before you start the machine, you must know how the
machine operates. Use your manual to identify each
control lever, switch, gauge, button and pedal. Do not
guess. If there is anything you do not understand, ask your
JCB distributor.
The operator must always be aware of events happening
in or around the machine. Safety must always be the most
important factor when you operate the machine.
When you understand the operating controls, gauges and
switches, practice using them. Drive the machine in an
open space, clear of people. Get to know the 'feel' of the
machine and its driving controls.
Finally, do not rush the job of learning, make sure you fully
understand everything in the Operation section. Take your
time and work efficiently and safely.
Remember
BE CAREFUL
BE ALERT
BE SAFE
To Next Page
Loading...
Need help?
General
