Operation
Storage of the Machine
156 156
9811/9950-1
Storage of the Machine
Introduction
T2-074
If you will not use the machine for an extended period, you
must store the machine correctly. If you prepare the
machine carefully and apply on-going care you can
prevent deterioration and damage to the machine while it
is in storage.
Note: JCB Dealers must check stock monthly.
Storage Area
The machine can be stored in a temperature range of:
-40°C to 54°C (-40°F to 129°F).
When possible, you must keep the machine in a dry
building or shelter.
If only an outdoor storage area is available, look for a
storage area with good drainage.
If the machine is to be out of use for an extended period,
careful preparation and on-going care will minimise the
possibility of deterioration and damage while in storage.
Prepare the Machine for Storage
T2-076
1 Clean the machine to remove all unwanted material
and corrosive products.
Dry the machine to remove solvents and moisture.
2 Apply grease to the moving parts. Refer to Greasing
the Machine.
3 Examine the machine for worn or damaged parts.
Replace if necessary.
To Next Page
Loading...
Need help?
General
