jcb CT160 User Manual

Preservation and Storage
Storage
73 9831/7750-1 73
3. Examine all fluid levels. If necessary, add more fuel.
4. Install a charged battery.
5. Start the engine.
6. Operate the hydraulic controls. Make sure that the hydraulic functions operate correctly.
7. Prepare the machine for storage.
Take out of Storage
1. Examine the coolant condition. Replace if necessary.
2. Examine all fluid levels. If necessary replace the fluid or add more fluid.
3. Clean the machine to remove all unwanted material and corrosive products. Dry the machine to remove
solvents and moisture
4. Remove the grease or petroleum jelly from the ram piston rods.
5. Install a charged battery.
6. Start the engine.
7. Operate the hydraulic controls. Make sure that the hydraulic functions operate correctly.

jcb CT160 Specifications

General

Brand	jcb
Model	CT160
Category	Construction Equipment
Language	English