Operation
Drive Controls
44 9831/7750-1 44
Drive Controls
Steering Wheel
Turn the steering wheel in the direction you want to go. Refer to: Component Locations (Page 18).
The steering wheel incorporates an assister knob for single handed operation.
Hand Throttle Control
A hand operated throttle lever is located on the steering column.
The hand throttle control lever has three positions.
1. Push the lever downward into the operation position during normal machine operation.
2. Pull the lever upwards into the idle position after operation of the machine.
Figure 22.
A Hand throttle control B Operating position at 66 Hz
C Operating position at 50 Hz D Idle position
Do not adjust the speed of the machine with the throttle, always use the drive lever.
Transmission Drive Lever
The drive lever has three positions: forward, neutral/park brake and reverse. Refer to Figure 23.
Use the drive lever for changing the driving direction and speed adjustments.
To Next Page
Loading...
Need help?
General
