SYMBOL EXPLANATION
Symbols
WARNING: Clearing saws, brush- L_
cutters and trimmers can be dan- fro\
gerous! Careless or incorrect use it _
can result in serious or fatal / • •
injury to the operator or others.
Please read the operator's manual
carefully and make sure you r[]I ri.]
understand the instructions
before using the machine.
Always wear: @
• A protective helmet where there
is a risk of falling objects
• Hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
max
10000 rpm
A
Beware of thrown objects and _., "_
ricochets.
The operator of the machine
shall ensure, while working,
that no persons or animals come
closer than 50 feet (15 meters).
Machines fitted with saw blades
or grass blades can be thrown
violently to tt_e side when the
blade comes into contact with
a fixed object. The blade is
capable of amputating an arm
or leg. Always keep people
and animals at least 50 feet
(15 meters) from the machine.
Arrows which show limits for
handle mounting. _ t
Always wear approved protective
gloves.
Use anti-slip and stable boots.
Only use non-metalHc, flexible
cutting attachments, i.e. trimmer
heads with trimmer line.
Use unleaded or quatity leaded %. /t_-_-)__.
gasoiine and two-stroke oil
mixed at a ratio of 2% (t :50).
Other symbols/decals on the machine
refer to special certification requirements
for certain markets.
Stop the engine by pushing
and holding the stop switch
in the STOP position. CAUTION!
The stop switch automaticalIy
returns to the start position.
In order to prevent unintentional
starting, the spark plug cap must be
removed from the spark plug when
assembling, checking and/or
performing maintenance.
Regular cleaning is required. _-]
Visual check.
Approved eye protection must
always be used.
To Next Page
Loading...
Need help?
General
