A
– 26 –
Functions can be selected and specied.
1) Press
.
The content on display section
A
is changed over
to display function setting number (P-**).
(The display item which was previously changed
is displayed unless the power has not been turned
o after the previous change.)
* If the screen display does not change, re-carry out
operation described in step 1).
Be sure to re-turn ON the power switch
when ten or more seconds have passed af-
ter turning it OFF. If the power switch is re-
turned ON immediately after turning it OFF,
the sewing machine may fail to operate
normally. In such a case, be sure to turn
ON the power switch again properly.
2) To change the function setting number press
to
and change it to a desired one.
3) After having changed the function setting number to a desired one, press switch
to display the
set value of the selected function setting No.
4) Press
to
change the set value.
5) Press switch
to conrm the set value.
4. Setting of functions
To Next Page
Need help?
General
