To Next Page

To Previous Page

108

[Setting procedure of Level 1]

・ Change set value with “+/–”

Key of switch 5.

The set value has been

changed from “0” to “3”.

・ When this changed value is

acceptable, press switch 7.

When you desire to return

the value to the previous

one, press switch 6.

・ Turn OFF the power switch

and turn ON the power

switch after approximately

one second.

・ Change of the set value is

determined by turning OFF

the power switch.

1) Press switch 1 for

approximately three

seconds.

2) Press switch 2.

JUKI LZ-2290A-SR/IP-100D/SC-916 User Manual

Questions and Answers: