109
4
3
3
8
5
5
6
7
3) This screen is the function
setting screen.
Change the setting No.
with “+/–” Key of switch 3.
For the details of setting
No., see page 81.
Example) Changing the
number of
rotation of
reverse feed
stitching
(Setting No. 8)
Change the setting No. to “8”
with “+” Key of switch 3 in the
figure above.
・ Press switch 4.
・ Change the set value with
“+/–” Key of switch 5.
・ Set value has been changed
from 1350 to 1250.
・ When this changed value is
acceptable, press switch 7.
Press switch 6 when you
desire to return the value to
the former one.
・ Press switch 8 in case of
sewing.
Setting No.
Set value
To Next Page
Loading...
Need help?
General
