EasyManua.ls Logo

JUKI MCS-1500 - Gathering with Chainstitch; Binding; Tape Guide

JUKI MCS-1500
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Practical Sewing Chainstitch
Gathering with chainstitch
A single layer of lightweight fabric can be gathered with differential
feed.
Differential: 2
Stitch length: 4 mm
Thread tensions: Basic
Binding
Stitch length: 3-4 mm
Differential: N
Cut bias binding or bias cut strips four times the width of the desired
width, mark if wanted or press. Place right side of binding on wrong
side of item, pin if wanted and sew together. Lay bias round the fabric
edge and topstitch from the right side.
Chainstitch presser foot
(Optional Accessory)
Chainstitch presser foot
(Optional Accessory)
Tape guide
The chainstitch presser foot is equipped with a guide for
tapes and elastics up to a width of 8 mm.
Raise the needle.
Raise the presser foot.
Place the tape under the foot and slip it into the guide from
the right.
Lower the presser foot.
Sew a few stitches on the tape.
Raise the tip of the presser foot, place work underneath the
tape / elastic and sew.
31

Table of Contents

Other manuals for JUKI MCS-1500

Related product manuals