− 12 −
a
a
1
3
4
1
3
4
4) One-shot automatic stitching setting function
(Function setting No. 76)
Press / switch 1 to advance to the
function setting No. 76.
It is possible to change the set value with
switch 3 or switch 4.
0 : Pedal designated speed is prior.
1 : Automatic operation
(Caution) 1. It is rendered effective when the
material end sensor function is set.
It is not possible to prohibit the
one-shot operation at the time of
the verlapped stitching operation.
2. Speed of rotation is the speed set
at the function setting No. 38.
When "1" is selected, the one-
shot automatic stitching display
lights up when the mode is
returned to the normal one.
5) Thread trimming prohibition function setting
(Function setting No. 9)
Thread trimming operation at normal stitching and
overlapped stitching can be prohibited by selecting
the thread trimming prohibition.
Press / switch 1 to advance to the
function setting No. 9.
It is possible to change the set value with
switch 3 or switch 4.
0 : Thread trimming is effective.
1 : Thread trimming is prohibited.
When "1" is selected, the thread
trimming prohibition display lights
up when the mode is returned to
the normal one.
(Caution) When the specified number of stitches
is insufficient, there is a case where the
sewing machine cannot stop within the
specified number of stitches depending on
the speed of rotation of the sewing
machine.
To Next Page
Loading...
Need help?
General
