JUKI SC-500 User Manual

− 15 −
* Functions with * (asterisk) are those for maintenance. Be very careful of changing the set value.
Indication of
function setting
Item
Soft start
function
Material end
sensor function
Thread trimming
function by
material end
sensor
Number of
stitches for
material end
sensor
Flicker
reducing
function
Bobbin thread
counting
function
Unit of bobbin
thread
counting down
Number of
rotation of
reverse feed
stitching
Thread
trimming
prohibiting
function
Setting of
needle bar
stop position
when the
sewing
machine stops.
Click sound of
key switch
mounted on
PSC
Optinal switch
function
selection
Function of
prohibiting start
of the sewing
machine by
bobbin thread
counter
Sewing
counter
Number of times
of detection of
run-out of bobbin
thread remaining
amount
Function of
neutral presser
lifting
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
21
Setting
range
0 to 9
(Stitches)
0/1
0/1
0 to 19
(Stitches)
0 to 8
0/1
0 to 2
150 to 3,000
(r.p.m.)
0/1
0/1
0/1
0 to 8
0 to 2
0/1
0 to 19
0/1
Description
The number of stitches to be sewn at a low speed when the soft-start
function is used at the start of sewing.
0 : Soft-start function is not operative.
Material end sensor function (used in case of without panel).
0 : Material end detection function is not operative.
1 : After detecting material end, the specified number of stitches (No.
4) will be sewn, and the sewing machine will stop.
Thread trimming function by material end sensor (used in case of without
panel).
0 : Automatic thread trimming function after detection of material end
is not operative.
1 : After detecting material end, the specified number of stitches (No.
4) will be sewn, and the sewing machine will stop and perform
automatic thread trimming.
Number of stitches for material end sensor (used in case of without panel).
Number of stitches from detection of material end to stop of the sewing
machine.
Flicker reducing function (If the hand lamp flickers).
0 : Flicker reducing function is not operative.
1 : Less effective  8 : Highly effective
Bobbin thread counting function
0 : Bobbin thread counting function is not operative.
1 : Bobbin thread counting function is operative.
Unit of bobbin thread counting down
0 : Count/10 stitches
1 : Count/15 stitches
2 : Count/20 stitches
Sewing speed of reverse feed stitching
Thread trimming prohibiting function (used in case of without panel).
0 : Thread trimming prohibiting function is not operative.
1 : Thread trimming is prohibited.
(Output of solenoid is prohibited. : Thread trimmer and wiper)
Position of needle bar is specified when the sewing machine stops.
0 : Predetermined lowest position
1 : Predetermined highest position
Click sound of key switch mounted on PSC is specified.
0 : Click is not operative.
1 : Click is operative.
Switching of function of optional switch.
0 : No function
1 : Needle up/down compensating stitching
2 : Back compensating stitching
3 : Function of canceling once reverse feed stitching at the end of sewing
4 : Thread trimming function
5 : Presser foot lifting function
6 : One stitch compensating stitching
7 : Function of simultaneously canceling reverse feed stitching at the
start and end of sewing
8 : Presser foot lifting function when pedal is neutral
Function of prohibiting start of the sewing machine by bobbin thread counting
0 : When counting is out (-1 or less) Function of prohibiting start of the
sewing machine is not operative.
1 : When counting is out (-1 or less) Function of prohibiting start of the
sewing machine after thread trimming is operative.
2 : When counting is out (-1 or less), the sewing machine stops once.
Function of prohibiting start of the sewing machine after thread
trimming is operative.
Counting function of sewing (number of completion of process)
0 : Sewing counter function is not operative.
1 : Sewing counter function is operative.
Number of times of detection of run-out of bobbin thread remaining amount
0 : Function of bobbin thread remaining amount is not operative.
1 to 19 : Number of times during which the signal is not made even if
run-out of bobbin thread remaining amount is detected.
Function of lifting presser foot when the pedal is in neutral position.
0 : Function of neutral automatic presser lifting is not operative.
1 : Selection of function of neutral presser lifting.
Ref.
page
19
19
19
19
19
19
19
19
20
20
26
20
20
3
0
4
5
5
0
8 1900
11
1
12
0
14
1
1 0
2
0
6
1
7
0
9
0
10
0
13
0
15
1
21
0
(4) Function setting list
*

JUKI SC-500 Specifications

General

Brand	JUKI
Model	SC-500
Category	Sewing Machine
Language	English